New 400 amp clamp meters 
   

61-732
Read about the new 400A clamp meters.
For electricians looking for a dependable, affordable 400A clamp meter, it’s tough to beat the IDEAL 730 Series. From a non-contact voltage indicator at the tip of the jaws, to a large easy-to-read display, the 730 Series clamps make current measurements simple and reliable.



 
  New 600 and 1000 amp clamp meters with unique TightSight™ display 
   
61-768_endDisplay_tn
Read about the new 1000 and 600A clamp meters, which are purpose-built to meet the needs of electricians working in industrial and commercial applications. Especially effective for measuring high-voltage systems in tight, hard-to-reach panel boards because of the patented TightSight? display built into the bottom of the testers to enable electricians to view the display from virtually any angle.

 
  New clamp meters with unique display provide safe, reliable high voltage system measurement in hard-to-reach panel boards 
    IDEAL INDUSTRIES has launched a line of safe, convenient and high performance clamp meters. The 1000 and 600A clamp meters are purpose-built to meet the needs of electricians working in industrial and commercial applications, and are especially effective for measuring high-voltage systems in tight, hard-to-reach panel boards. Available in five models, the new meters are the world's first to have the patented TightSight? display built into the bottom of the testers to enable electricians to view the display from virtually any angle.
61-774_tn


 
  Part P Testing at the Touch of a Button 
   

61-253_tn
Say goodbuy to bulky testers that require two hands and too much time to operate.

The new SureTest® Testers put everything you need in the palm of your hand



 
  New handheld 16th Edition Loop and RCD testers help electricians comply with Part P of the Building Regulations  
   
61-253_tn
Ideal Industries, a global manufacturer and supplier of advanced electrical test and measurement solutions, has introduced the new, easy to use, SureTest® handheld tester range. SureTest® testers perform loop impedance and residual current device (RCD) testing to BS 7671 and provide full compliance with the 16th Edition wiring regulations when used in conjunction with a separate insulation and continuity tester. SureTest® testers are valuable tools for any authorised electrician who needs to demonstrate compliance with the new Part P of the Building Regulations.


 
  LANTEK SERIES: NEW LANTEK FIRMWARE 2.1 and LRS 3.2 Available 
    Read more about the newest LANTEK SERIES firmware and LANTEK REPORTER software versions, offering new and unique features like DUALMODE™ testing and many other new options!

 
  New 600 and 1000 amp clamp meters with unique TightSight? display  
   
61-768_endDisplay_tn
Read about the new 1000 and 600A clamp meters, which are purpose-built to meet the needs of electricians working in industrial and commercial applications. Especially effective for measuring high-voltage systems in tight, hard-to-reach panel boards because of the patented TightSight? display built into the bottom of the testers to enable electricians to view the display from virtually any angle.


 
   
   
tuff rod news tn
New Tuff-Rod™ Tuff-Rod™ Fishing Pole Kits

 
  Ideal Industries launches the first comprehensive voice, data, and video (VDV) multimedia cable tester  
   
PR VDV
Ideal Industries, a global manufacturer and supplier of advanced cable testing and certification equipment, has launched its new simple-to-operate VDV multimedia cable tester for comprehensive identification and verification of voice, data and video networks. The tester is the first to be equipped with RJ11/12, RJ45 and coax F-connector interfaces to enable in house IT technicians and cabling installers to move quickly through varied voice, data and video environments, testing all wiring types using the same tester for every connection


 
  Ideal launches world's highest frequency LAN Cable Certifier 
    Global manufacturer and supplier of advanced cable testing and certification equipment, Ideal Industries, has announced a major upgrade to its LANTEK® 7 certification tester. Ideal’s new enhanced LANTEK® 7G is the world’s first handheld LAN cable certifier to test up to 1GHz, enabling it to test ISO Class F, Category 6a/7 and beyond, effectively future-proofing a customer’s investment. The previous generation of LANTEK® 7 certified up to 750MHz.

 
  Ideal’s LANTEK 7 is the only handheld field tester to be independently verified to Level IV accuracy draft standard 
   

PR LANTEK Level IV Certified
IDEAL INDUSTRIES has achieved an endorsement of its network certification testing technology from the ETL SEMKO division of Intertek. Ideal’s LANTEK? 7 cable tester is the first to be independently verified as having met the Level IV Baseline, Channel, and Permanent Link accuracy requirements as specified in the IEC SC46A subcommittee draft IEC document. The document in its final form will become part of IEC Standard IEC 61935-1, which is a referenced document in ISO 11801.



 
  Ideal bolsters datacomm test range with the introduction of the NAVITEK™ active network tester 
   
PR NAVITEK
Global manufacturer and supplier of advanced cable testing and certification equipment, Ideal Industries, has announced the availability of its first active network tester. NAVITEK™ is a comprehensive handheld network diagnostic tool that empowers IT professionals, facility management personnel, and installers to identify and correct common problems related to the physical layers of local area networks (LANs).

 
  New Tuff-Rod? fishing poles improve the flexibility and performance of electrical and data line installation  
   
PR Tuff Rod tn
Ideal Industries, global manufacturers and suppliers of quality installation tools and test products for the electrical and data communications markets, announces the introduction of the Tuff-Rod? fishing pole kits. Tuff-rod? fishing poles simplify the installation of electrical and data cables in walls, roof voids, raised floors and suspended ceilings and are ideal for pulling wire where thermal insulation is already installed.

 
  IDEAL Expands Communication Test Business with Acquisition of the Trend Test Equipment Division of Telemetrix Plc 
    Sycamore, IL, February 19, 2004 - IDEAL INDUSTRIES, INC. today announced that it has expanded its DataComm business by acquiring the Trend Test Equipment Division of Telemetrix Plc. Trend is recognized worldwide as a leader of hand held test equipment in ATM, xDSL, SDH/Sonet, Gigabit Ethernet and IP testing. They are headquartered in High Wycombe, United Kingdom.

 
  March 2004 Datacomm Promotion 
   
 
promotion 04-002A

New LinkMaster™PRO XL , kit# 33-886 - Featured product of the month!

The newest member of the LinkMaster™ PRO family of LAN-cable verifiers includes all features of the proven LinkMaster™PRO plus basic testing capabilities on active LAN networks.



 
  March 2004 Datacomm Featured Product 
   
 

Promotion 04-002B tn

Zoom™ Fish Tapes - Featured Products of the Month!

Zoom™ Fish Tapes are IDEAL´s the most popular installation aide for both electrical as well as datacommunication cables- learn more about this outstanding product line!



 
  LANTEK® 7 on the advance for Cat. 7 Certifications! 
   

PR TKM
TKM, a leading manufacturer and supplier of network components has approved the LANTEK® 7 cable tester from IDEAL INDUSTRIES for certification of TKM ISO Class F/Cat 7 installations. This announcement adds to the growing list of manufacturers who have approved the IDEAL LANTEK® 7 for certification of their ISO F cabling systems. Only LANTEK® 7 can fully test and certify Category 7 installations over the full 600 MHz frequency range defined by standards.



 
  IDEAL bolsters voice & data tester lineup with new LinkMaster™ PRO XL featuring improved voice testing and HUB blink capabilities 
   
LM PRO XL_tn
IDEAL INDUSTRIES, a leading supplier of data communications solutions introduces the next generation of its popular LinkMaster™ LAN and voice cable tester — LinkMaster PRO XL. Targeting network installers, repair technicians and data communications contractors, IDEAL has expanded LinkMaster’s capability to map, test and troubleshoot cable and coax runs with important new features including the capability to blink HUBS to assure connected configurations on active networks.

 
  LANTEK Series 2004 Exchange Rate Promotion 
   
Promotion Feb 04 LAN tn
SPECIAL PRICING ON LANTEK ® TESTERS - CHANGE TO LANTEK ® 7 SHIPMENTS

Thanks to recent currency gains we can offer special pricing on all LANTEK® Series testers, effective February 3rd, 2004.



 
  Les nouvelles pinces ampèremétriques avec second écran fournissent des mesures fiables et sans danger sur des panneaux d'accès difficile 
   

61-768_endDisplay_fs
Les nouvelles pinces ampèremétriques avec second écran fournissent des mesures fiables et sans danger sur des panneaux d'accès difficile



Newsletter